HRL9-12
HRL9-12 HRL Series B.B. Battery Valve-Regulated Lead-Acid Battery, 12V integrated design, power range 132-5205W. Equipped with impact-resistant ABS casing and sealed terminals, built-in safety pressure relief valve, supports horizontal and vertical installation. Has a long service life of 12 years and capacity of 5.5-215AH, optimized for high-rate discharge scenarios such as UPS, data centers, emergency lighting, security systems, and renewable energy, providing high power density and maintenance-free reliable power.
Taobao store
WeChat procurement
Product Features
- Maintenance free(no water topping-up required)
- No free acid(Non-spillable battery)
- The battery is designed for high rate usage
- Can be used in any orientation(excluding used inverted)
- Absorbent Glass Mat technology for efficient gas recombination
- The power density at 5 min-15min discharging rate is 30% higher than BP series
- Flame-arrestor is installed to ensure safety
Application Scenarios
- Uninterruptible power supplies
- Medical equipment
- Emergency lighting and video surveillance systems
- Access control and management systems
- Telecommunication facilities
- Data processing centres
- Alternative energy sources
- Electrical supply network and power industry
- Wheelchairs
- Floor cleaning equipment
Product parameters
- ModelHRL9-12
- Voltage12 V
- 10-hour Ah8
- Weight kg2.75
- Weight lbs6.06
- Standard terminal typeT2
- Standard terminal position-
- Optional terminal typeT1 B0
- Optional terminal position-
- Length mm151
- Length inches5.94
- Width mm65
- Width inches2.56
- Height mm94
- Height inches3.7
- Thickness mm100
- Thickness inches3.94
Product details
The HRL9-12 model from B.B. Battery is a reliable representative of the HRL series, providing stable power support in a 12V integrated form. The design fully considers durability and safety: its casing is made of sturdy opaque impact-resistant ABS plastic, the battery cover is firmly connected to the casing, and the terminal area is effectively sealed to prevent leakage risks. The terminal design varies by specific model, ensuring connection reliability.In the production process, the electrolyte is injected through the six dedicated holes on the battery cover, and then pressure relief valves made of non-combustible materials are installed. This key design greatly enhances the battery's fire and explosion safety, allowing users to use it with peace of mind in various application scenarios.
In terms of internal structure, the positive and negative plates of the HRL9-12 battery are both coated with a special paste-like coating, and combined with the absorbent glass fiber separator technology, efficient gas recombination is achieved, thus making the battery meet the maintenance-free standard, and users do not need to add water regularly.It is specially designed for high-rate discharge and can provide excellent specific output power in short-time discharge mode. It is particularly suitable as a core component of an uninterruptible power supply (UPS) and is recommended for critical occasions with a backup time not exceeding 60 minutes. For example, at a discharge rate of 5 to 15 minutes, its power density is 30% higher than similar BP series batteries, demonstrating excellent instantaneous power supply capability. Its discharge power range is wide. Under the condition of discharging to 1.3 volts per cell in 15 minutes, the entire HRL series can provide power from 132 to 5205 watts per battery, meeting basic to high-power requirements.
The installation flexibility of this battery is also a major highlight; it supports horizontal and vertical installation (excluding inversion), providing convenience for spatial layout within various cabinets and equipment. Under normal working conditions, the expected service life of the HRL series batteries can be as long as 12 years, meeting Eurobat's standards for long-life batteries and providing users with long-term investment protection. Its capacity range covers 5.5 to 215 Ah (corresponding to different discharge rates such as C2, C5, C10, etc.). The specific model HRL9-12 has a nominal voltage of 12V, a 10-hour rate capacity of 8 Ah, physical dimensions of 151 mm (length) × 65 mm (width) × 94 mm (height), and a weight of approximately 2.75 kg, with a compact design that facilitates integration into various systems.75 kilograms, compact design facilitates integration into various systems.
The HRL series batteries have extremely wide application scenarios, being an ideal power choice for medium and low-power uninterruptible power supplies, data processing centers, power industry power supply networks, emergency lighting systems, security video surveillance, access control management systems, and various medical equipment. Meanwhile, it also plays an important role in renewable energy fields such as solar and wind energy energy storage systems. In addition, this series of batteries can also be used for backup power at oil and gas extraction sites, emergency reserves for rural estates or hotels, support for retail store cash registers, and even powering auxiliary systems of certain electric vehicles.With its free acid-free property and leak-proof design, it ensures a clean and safe usage environment, and is a valve-regulated sealed lead-acid (VRLA) battery solution that combines high performance, long service life, and multi-purpose applications.
